top of page
drDGT_edited_edited_edited.png

Prof. Dineshsingh G Thakur 

      Dr. D. G. Thakur graduated in Mechanical Engineering from BAM University-Aurangabad, Maharashtra, India, in 1996 and Master of Technology in Mechanical Engineering, from the Indian Institute of Technology (IIT), Madras, in 2001. Subsequently, he has pursued Doctoral research work in the area of High Speed Machining of Aerospace Materials at IIT, Madras in 2009. He has authored 75 publications in reputed peer-reviewed journals and a good number of publications in various National/International conferences.  He has Authored a book and Authored book chapters. He was a Principal investigator of three sponsored R&D projects funded by AR&DB (DRDO)/SERB etc.  He has 25 years of teaching experience. He has guided Five PhDs, MS By Research and over sixty five M. Tech. projects, and currently guiding seven Ph.D. students. He is working as Reviewer for most of the well refereed International Journals.

info@mysite.com

123-456-7890 

Education:

  • 2009; PhD

  • 2001; M.Tech

  • 1996; B.E

Professional Experience (Institution, Position and Period):

  • Asst. Professor. Dr. B. A. Technological University (Govt. of Maharashtra)-Raigad-402103 (MS). 1996 - 2011.

  • Associate Professor. Defence Institute of Advanced Technology (Deemed to be University), DRDO, Pune-25. 2011 - 2018.

  • Professor. Defence Institute of Advanced Technology (Deemed to be University), DRDO, Pune-25. 2018 - Till date

Research Domains:

  • CAD/CAM/Robotics.

  • Manufacturing Consideration in Design

  • Fabrication, Characterization and Processing of Composite Materials

  • High speed machining/green machining of aerospace materials, Precision Robotic Welding of Aerospace Materials.

  • Micro manufacturing/Micromachining of “Difficult to cut materials”. Surface Engineering.

  • Additive Manufacturing (3D Printing).

Specific Projects:

  • MMC for Nuclear and Defence Application

  • Electro-less coating for Marine Application

  • High Speed Machining Machinability aspect of Aerospace Alloys

  • Dynamic Analysis of Aero couplings.

  • Impact Analysis of APFSDS.

  • Thermal Barrier Coatings of Defence Applications.

  • CFD Analysis of Air craft seat ejection system

  • Additive Manufacturing (3D Printing ) of Aircraft stiffner

Awards/Scholastic Achievements:

  • Nominated for best paper award at “World Congress on Engineering-2009, London”.

  • Invited to Chair International conference AES-ATEMA-2012-Italy.

  • Listed in the “Who’s who in the World, (2010)

  • Listed in the “ Learned India Educationists Who’s Who” 2017

  • Listed in the “Asian American Who’s Who” 2017

  • Recipient of best paper award International Conference ICRAME 2015-Pune (MS).

  • Invited to Chair International conference AES-ATEMA-2013-Italy.

  • Recipient of best paper award International Conference ICTIEM-2018, Feb 26-27, 2018 at Deogiri Institute of Engineering and Management Studies-Aurangabad.

 Patents:

  • Multiutility Punching Machine (Applied)

Articles:

  • B.B.Singh and D.G.Thakur., “Information Technology and the knowledge Society” , Vol.25, pp.54-58, 2002.

  • D.G.Thakur and B.B.Singh, “ Human Values In Education ” 2002.

  • D.G.Thakur and B.B.Singh, “ Educational Philosophy and Micro Teaching” , New Delhi

Books:

  • Nature-Inspired Optimization in Advanced Manufacturing processes and systems, Ganesh M Kakandikar, Dinesh G Thakur, CRC Press Taylor &  Francis Group, 2020

Book chapters:

  • FE Analysis of the Glass/Jute/Polyester Bone Plate Versus Traditional Metal Plate for Ulna Bone Fracture. Rajkumar Deshmukh, Sudarshan Sanap S., Dineshsingh Thakur (2021), Techno Societal, Springer.

Research Collaborations:

  • DRDO Labs

  • VIT Vellore

  • Agriculture University-Parbhani

  • MIT WPU Pune

  • MITADT Pune

  • Dy Patil CoE-Pune

  • AR&DB New Delhi

  • NITTE Manglore

  • BARC Mumbai

  • IIT/NIT

Ph.D Thesis Supervision (COMPLETED):

  • Study on the dynamic characteristics of combat aircraft high speed flexible coupling - S Nagesh Sc. E’ CVRDE, Chennai.

  • Processing, Characterization and Mechanical Behavior of Boron Carbide Reinforced Aluminum Metal Matrix Composites - Ritesh Raj.

  • Experimental Investigations on Surface Properties of Electroless Ni-P/ZnO Composite Coatings on AZ91 Magnesium Alloy – Imran Ansari.

  • Numerical and Experimental Studies on Maximum pressure rise in double base propellant rocket motor- Balesh Ropia

  • Experimental Assessment for Characterisation and Performance Evaluation of Magnesium/ Teflon/ Viton (MTV) Decoy Flares- Gp Cpt Sukamal Adhikary

MS by Research Supervision:

  • An Experimental Study of Wire EDM on near ß Titanium Alloy Ti-10V-2Fe-3Al – K. Parameshwar, DMRL, Hyderabad

M.Tech. Dissertation Supervision:

  • Guided over 65 M.Tech Dissertations

Books
Total Journal Articles (Scopus/ SCI/SCIE)
Book Chapters
Articles published in the Conference volumes
Submitted/ Registered Patents
01
75
01
130
01

Research Publications:

International Journals Articles:

In 2008

  • Dinesh Thakur, B. Ramamoorthy, L. Vijayaraghvan, (2008) Influence of Different Post-treatments On Tungsten Carbide-cobalt Inserts, Materials Letters 62 ( 28) 4403-4406.

  • D. G. Thakur, B. Ramamoorthy, L. Vijayaraghvan, (2008) An experimental investigation on the machinability of Inconel 718 at high speed turning Manufacturing Technology Today 7 (11) 23-30.

  • D. G. Thakur, B. Ramamoorthy, L. Vijayaraghvan (2008) Some experimental investigations on the surface integrity aspects of superalloy Inconel 718 in high speed turning, Inernational Journal of Materials and Structural Integrity 2( 3) 265-279.

In 2009

  • D. G. Thakur, B. Ramamoorthy, L. Vijayaraghvan, (2009) Study on machinability characteristics of superalloy Inconel 718 during high speed turning, Materials and Design 30 (5) 1718-1725.

  • D. G. Thakur, B. Ramamoorthy L. Vijayaraghvan, ( 2009) Optimization of high speed turning parameters of superalloy Inconel 718 material using Taguchi technique, Indian Journal of Engineering and Material sciences (16) 44-50.

  • D. G. Thakur, B. Ramamoorthy and L. Vijayaraghvan, (2009) A study on the parameters in high speed turning of superalloy Inconel 718, Materials and Manufacturing Processes (24) 497-503.

  • D. G. Thakur, B. Ramamoorthy, L. Vijayaraghvan, (2009) Machinability investigation of Inconel 718 in high speed turning, International Journal of Advanced Manufacturing Technology, 45, 421-429.

  • D. G. Thakur, B. Ramamoorthy, L. Vijayaraghvan, (2009) An experimental analysis of effective high speed turning of superalloy Inconel 718, Journal of Material Science, 44(12) 3296-3304.

  • D. G. Thakur, B. Ramamoorthy, L. Vijayaraghvan Influence of minimum quantity lubricating (MQL) parameters on the tool wear study while high speed turning of superalloy Inconel 718, Indian Journal of Tribology (Accepted, In press).

  • D.G. Thakur, Dr. P.K. Brahmankar, Dr. M. Sadaiah. “Drilling of Glass fiber reinforced composite with modified HSS drill geometry” Manufacturing TechnologyToday.

  • Dr. M. Sadaiah & D.G. Thakur. “Turning of Inconel 718 with multiplayer CVD coated carbid      tools” Manufacturing Technology Today.

 In 2010

  •  D. G. Thakur, B. Ramamoorthy, L. Vijayaraghvan (2010) Investigation and optimization of lubrication parameters in high speed turning of superalloy Inconel 718 International Journal of Advanced Manufacturing Technology, 50, 5-8. DOI 10.1007/s00170-010-2538-1.

 In 2011

  • D. G. Thakur, B. Ramamoorthy, L. Vijayaraghvan, (2011) A study on the surface integrity aspects of superalloy Inconel 718 under minimum quantity lubrication in high speed turning, International Journal of Materials and Structural Integrity, Vol.5, No.1, pp.36 – 45 (Inderscience).

In 2012

  • DG Thakur B. Ramamoorthy, L. Vijayaraghvan (2012) Effect of cutting parameters on the degree of work hardening and tool life during high-speed machining of Inconel 718, Int J Adv Manuf Technol, 59:483–489 (IF 1.7) (Springer).

  • DG Thakur RK Singh, C Ramadasa RD Misal (2012) Numerical Modeling of Transmission and Reflection of Lamb Waves in Delaminated Composite Structure, International Journal of Advanced Materials, Manufacturing and Characterization, Vol 1 (1), 88-92.

  • DG Thakur RK Singh C Ramamdosa RD Misal (2012) Numerical Analysis of Lamb Wave Propagation in Delaminated Composite Laminate, Procedia Engineering, Vol 38, 2510–2519 (Elsevier).

  • DG Thakur B. Ramamoorthy, L. Vijayaraghvan (2012) Some Investigations on High Speed Dry Machining of Aerospace Material Inconel 718 Using Multicoated Carbide Inserts, Materials and Manufacturing Processes, 27 (10), 1066-1072 (IF 1.4) (Taylor and Fransis).

In 2013

  • DG Thakur B. Ramamoorthy, L. Vijayaraghvan (2013) Influence of minimum quantity lubrication on the high speed turning of aerospace material superalloy Inconel 718, Int. J. of Machining and Machinability of Materials, Vol.13, No.2/3, pp.203 – 214 (Inderscience).

  • DG Thakur B. Ramamoorthy, L. Vijayaraghvan (2013) Finite Element Modeling and High Speed Cutting Simulation of Superalloy Inconel 718, Journal of Machining and Forming Technologies, Vol 5 (1-2), 117-134 (Hidawi).

In 2014

  • DG Thakur, J Basha and S. Nagesh (2014) Influence of applied misalignment on the balanced high speed flexible coupling of fighter aircraft, Applied Mechanics and Materials Vols. 592- 594 pp 1084-1088.

  • DG Thakur (2014) Precision Drilling of Glass Fiber Reinforced Composite (GFRP) with Modified HSS Drill Geometry, Advanced Materials Manufacturing & Characterization Vol 4 Issue, 65-69.

  • DG Thakur Nilesh Patil PK Brahmankar (2014) Comparative study of high speed machining of Inconel 718 in dry condition and by using compressed cold carbon dioxide gas as coolant, Procedia CIRP 24 (2014) 86 – 91 (Elsevier).

  • DG Thakur Vinod Murkute and Rahul Harshe (2014) Improvisation of Interfacial Bond Strength in Shape Memory Alloy Hybrid Polymer Matrix Composites, Procedia Materials Science, Vol 6, 316–321 (Elsevier).

  • DG Thakur Sachine Shinde and Vankundre, (2014) Optimization of Machining Parameters in Machining of Inconel 718 With Alcrn and Altin Coated Carbide Tools, International Journal of Engineering Sciences, Vol 8 (1), 44-48.

In 2015

  • DG Thakur, J Basha and S. Nagesh (2015) Dynamic performance analysis of high speed flexible coupling of gas turbine engine transmission system, Journal of Mechanical Science and Technology 29 (1) 173~179 (Springer).

  • DG Thakur B. Ramamoorthy, L. Vijayaraghvan (2015) Effect of post treatments on the performance of tungsten carbide (K20) tool while machining (turning) of Inconel 718, Int J Adv Manuf Technol, 76:587–596 (Springer) (IF 1.7).

  • DG Thakur and I Ansari, (2015) Effect of pH Bath on Phosphorus Content in Electroless Nickel-Phosphorus Deposit, International Journal for Technological Research in Engineering, Vol. 2 (7), (ISSN: 2347-4718).

  • K Pradeep, Dr DG Thakur, RJ Ritesh “Aluminium / Graphite Metal Matrix Composite for Journal Bearings in Marine Application” (International Journal of Applied Engineering Research (IJAER), ISSN: 0973-4562, (Accepted).

  • DG Thakur and A Misra (2015) Optimisation of Armour of Improvised Light Bullet Proof Vehicle by Finite Element Simulation, International Journal of Engineering and Management Research (IJEMR), 137-141 (ISSN (ONLINE): 2250-0758, ISSN (PRINT): 2394-6962).

  • DG Thakur, J Shine and I Ansari (2015) Effect of Bath Agitation on the Surface Properties of Electroless Nickel-Phosphorus Deposit, International Journal of Engineering and Management Research (IJEMR), 232-236 (ISSN (ONLINE): 2250-0758, ISSN (PRINT): 2394-6962).

  • DG Thakur and Ranjeetsingh Virdi (2015) Study of High Temperature Corrosion and Degradation of Boiler Combustion Components, International Journal of Engineering and Management Research (IJEMR), 2015, 225-231 (ISSN (ONLINE): 2250-0758, ISSN (PRINT): 2394-6962).

  • DG Thakur and I Ansari (2015) Influence of Electroless Nickel-Phosphorus Deposition On Hardness of Mild Steel and Az91 Magnesium Alloy, Vol 3 (9): 264-271, International Journal Of Pure And Applied Research In Engineering and Technology ISSN: 2319-507X (IF 4.2).

  • DG Thakur, S Nagesh and J Basha (2015) Swift Assessment of Flexible Elements of High Speed Flexible Couplings for Aircraft Transmission Systems, Journal of Aerospace Sciences & Technologies, Vol 67 (3), 408-415.

  • DG Thakur S Nagesh and J Basha, (2015) An investigation and 3D crack propagation analysis of high speed flexible coupling of fighter aircraft, Journal of Failure Analysis and Prevention, Vol 15 (5), 662-671 (Springer).

  • DG Thakur S Nagesh and J Basha, (2015) Sensitivity analysis of mission critical shear bolts of combat aircraft high speed flexible coupling, Journal of Failure Analysis and Prevention, Vol 15 (5), 672-678 (Springer).

  • DG Thakur, PD Unde, RS Pawade, MD Gayakwad, NG Patil and PK Brahmankar Experimental investigations into abrasive waterjet machining of the carbon fiber reinforced plastic (CFRP) laminate, Journal of Composite Volume 2015, Article ID 971596, 9 Pages (Accepted).

  • DG Thakur and Ritesh Raj (2015) Micromechanical modelling of fiber reinforced metal matrix composites subjected to longitudinal tensile loading, International Journal of Materials Engineering Innovation, (Inderscience) (Accepted).

In 2016

  • DG Thakur and R Virdi (2016) "Investigation and Analysis of High Temperature Corrosion and Degradation of Marine Boiler Combustion Component (Swirler)" International Journal of Marine Science and Application, 15 (1) 86-94, Springer, (Accepted).

  • DG Thakur and Imran Ansari (2016) “Study of Mechanical Properties of Electroless Nickel-Phosphorus Coatings with Influence of Surfactant on AZ91 Magnesium Alloy” Advanced Engineering Forum, ISSN: 2234-991X, Vol. 15, pp 56-63 Trans Tech (Switzerland).

  • DG Thakur, NG Patil and PK Brahmankar (2016) On the effects of wire electrode and ceramic volume fraction in wire electrical discharge machining of ceramic particulate reinforced aluminium matrix composites, 18th CIRP Conference on Electro Physical and Chemical Machining (ISEM XVIII), Procedia CIRP 42, 286 – 291 (Elsevier).

  • DG Thakur, S. Shinde and HV Vankundre A comparative study of cutting force, feed force, surface roughness and tool wear in machining of Inconel 718 with uncoated and coated tungsten carbide inserts Int. Journal of Applied Sciences and Engineering Research, Vol. 5, Issue 1, 2016 (ISSN 2277 – 9442).

  • DG Thakur, Imran Ansari and Sahil Jhulka (2016) Effect of pH on mechanical, physical and tribological properties of electroless Ni-P-Al2O3 composite deposits for marine applications Journal of Marine Science and Application 15 (4), 484-492 (Springer).

  • DG Thakur and Ritesh Raj (2016) Qualitative and quantitative assessment of microstructure in Al-B4C metal matrix composite processed by modified stir casting technique Achieves of Civil and Mechanical Engineering 16 (4), 949-960 (Elsevier) Impact Factor (2.2).

  • DG Thakur and Imran Ansari (2016) Effect of bath agitation on surface properties and corrosion behaviour of ENi-P coatings along with annealing temperature Engineering Science and Technology, an International Journal, 19 (4), 2094-2099 (Elsevier).

  • M. Imran and DG Thakur (2016) “Improvement of wear resistance of AZ91 magnesium alloy by electroless Ni-P coatings with influence of surfactant” Materials Today: proceedings Vol 4, 9870-9874 (Elsevier).

In 2017

  • DG Thakur, Imran Ansari and Kothawade (2017) Effect of Parametric Optimization and Evaluation of Electroless Nickel Coating on Micro-Hardness Using Taguchi Technique Advanced Science, Engineering and Medicine 9 (1) 63-68 (American Scientific Publishers).

  • DG Thakur and Imran Ansari (2017) A High Performance of ENi–P Coatings on Mechanical and Tribological Properties with Influence of Bath pH on AZ91 Magnesium Alloy Journal of Failure Analysis and Prevention, Vol 17 (1), 100-106, (Springer).

  • DG Thakur and Imran Ansari (2017) Influence of surfactant: Using electroless ternary nano composite coatings to enhance the surface properties on AZ91 magnesium alloy Surfaces and Interfaces Vol 7, 20-28, (Elsevier)

  • DG Thakur and Imran Ansari (2017) "Influence of Aliquat 336 on tribological properties of electroless ternary nano-composite coatings on AZ91 alloy" Part E: Journal of Process Mechanical Engineering, Vol 1, 1-9, (Accepted) IF (1.5) (SAGE).

  • M Ansari, Sahil Julka and DG Thakur (2017) “Enhancement of surface properties with influence of bath pH on electroless Ni-P-ZnO/Al2O3 nano-composites deposits for defence applications” Journal of Molecular Liquids, Vol 247, 22-33 (Elsevier) (IF 4.5) Elsevier.

In 2018

  • DG Thakur and Ritesh Raj (2018) "Influence of reinforcement content on the

  • microstructure, tensile strength and fracture behavior of boron carbide reinforced

  • aluminum metal matrix composites" Material Science and Engineering Technology, Vol 49 (9), 1068-80, 2018 (WILEY) (IF 0.5).

  • Srikanta Panda, RS Doohan and DG Thakur (2018) “Analytical study of Cryogenic plate fin Heat Exchanger for Helium Liquefier” International Journal of Engineering Technology Science and Research IJETSR (ISSN 2394 – 3386) Volume 5, Issue 3 862-866.

  • DG Thakur and Ritesh Raj (2018) "Effect of particle size and volume fraction on the strengthening mechanisms of boron carbide reinforced aluminum metal matrix composites." Part C: Journal of Mechanical Engineering Science (Accepted) (SAGE) (IF 1.05).

  • M Imran and DG Thakur (2018) “Tribological properties of electroless Nanocomposte deposits with influence of Aliuuat 336 on 6061 Aluminium alloy” Trans Indian Inst. Metals, Vol 71 (6) 1351-1356 (Springer) (IF 0.9).

  •  

In 2019

  • DR Makwana, DG Thakur & K Senthilkumar 2019 “Numerical analysis and effects on rigidity of combat vehicle structure due to blast load” Structural Integrity Procedia, 14, 44-52.

  • S Adhikari, H Sekhar and DG Thakur (2019) “Investigation of process parameter on the mechanical properties of MTV decoy flare pellets for Defence applications” Structural Integrity Procedia, 14, 127-133.

  • S Adhikari, H Sekhar and DG Thakur (2019) “Optimization of density of infra-red decoy flare pellets by Taguchi method” Sadhana, 44(7), 160-168, Springer (IF 0.842) (SCI).

In 2020

  • S Adhikari, H Sekhar and DG Thakur (2020) “Performance Evaluation of Mechanically pressed MTV decoy flare pellets” Sadhana, (Accepted) Springer (IF 0.842) (SCI).

  • S Adhikari, H Sekhar and DG Thakur (2020) “Optimization of compressive strength of MTV decoy flare pellets by Taguchi Method” Particulate Science and Technology, (Accepted) Taylor& Francis (SCI).

  • Balesh Ropia, Himanshu shaker, D G Thakur Study of Initial Pressure Rise in Multi Grain Solid Propellant Rocket Motor, Propellants Explosives Pyrotechnics, Wiley-VCHVerlag GmbH & Co. KGaA, Weinheim, Vol no. 45, issue no 1, pp 1-11, 2020, Indexed by SCIE., Impact factor 1.544 (SCIE).

  • Balesh Ropia, Jayesh Upadhyay, Rakesh Kalal, Himanshu shaker, D G Thakur, (2020) Study of Maximum Pressure Rise with Erosive Burning in Multi Grain Tubular Solid Propellant, Propellants Explosives Pyrotechnics, accepted for publication in Wiley-VCHVerlag GmbH & Co. KGaA, Weinheim, Indexed by SCIE,. Impact factor 1.544.

  • Balesh Ropia, Himanshu shaker, D G Thakur (2020) Study on maximum pressure rise with igniter mass in tubular grain rocket motor, Accepted for publication in Science and Technology of Energetic Materials SCI (E), Impact factor 0.586.

  • DG Thakur (2020) Numerical investigation of the effect of fibre volume fraction on the stress distribution of aerospace grade Al-Li 8090 metal matrix composite, International Journal of Materials and Structural Integrity (Accepted).

  • Krishnan R, Naik M, Thakur DG, Dillibabu V. Experimental Investigation on Wear Behavior of Additively Manufactured Components of IN718 by DMLS Process. Journal of Failure Analysis and Prevention. 2020 Aug 12:1-7.

  • Patil C, Sonawane PD, Naik M, Thakur DG. Finite element analysis of flexural test of additively manufactured components fabricated by fused deposition modelling. InAIP Conference Proceedings 2020 Dec 7 (Vol. 2311, No. 1, p. 070026). AIP Publishing LLC. 

In 2021

  •  Rajkumar Deshmukh Sudarshan Sanap Dineshsingh Thakur Theoretical modelling and experimental characterization of composite material for ulna bone plate application.. Materials Today: Proceedings 46(1667) Volume 46, Part 7, 2021, Pages 2580-2586  DOI:10.1016/j.matpr.2021.02.075, Elsevier (Scopus indexed), 2021

  • Samadhan Deshmukh, Girish Joshia, Asha Ingle, Dineshsingh Thakur An overview of Aluminium Matrix Composites: Particulate, reinforcements, manufacturing, modelling and machining. Materials Today: Proceedings 46(56) https://doi.org/10.1016/j.matpr.2021.03.450, Elsevier (Scopus indexed), 2021

  • Parameshwar K, Srinivas a Rao Nandam and Dinesh G Thakur Performance evaluation of AE-pulse of wire EDM process on Ti-10V-2Fe-3Al alloy by Taguchi GRA technique. IOP Conference Series: Materials Science and Engineering Volume 1126, Issue 1, pp. 012080 doi:10.1088/1757-899X/1126/1/012080, IOP Publishing (Scopus indexed), 2021

  • Avinash Bhat, Ganesh Kakandikar, Abhijeet Deshpande, Atul Kulkarni, Dinesh Thakur Characterization of Al2O3 reinforced Al 6061 metal matrix composite, Material Science, Engineering and Applications, Vol. 1, Issue 1, 2021, p. 11-20. https://doi.org/10.21595/msea.2021.22028, (Scopus indexed) 2021

  • Ved Prakash, Sunil Chandel, Dineshsingh G.Thakur, Mukesh P. Mishra and R. K. Mishra Effect of multi-hole arrangement on the effusion cooling with backward injection International Journal of Turbo & Jet-Engines, https://doi.org/10.1515/tjj-2021-0023, 2021

  • Ved Prakash, Sunil Chandel, Dineshsingh G. Thakur, Mukesh Prakash Mishra and R. K. Mishra Effect of Multi-zone Effusion Cooling on an Adiabatic Flat Plate for Gas Turbine Application International Journal of Turbo & Jet-Engines Published online by De Gruyter December 8, 2021

  • Naik M, Thakur DG, Chandel S. Effect of Layer Height on Impact Strength of Additively Manufactured Short Carbon Fiber Reinforced Composite. Available at SSRN 4015381. 2021 Sep 27.

  • Naik M, Thakur DG. Experimental investigation of effect of printing parameters on impact strength of the bio-inspired 3D printed specimen. Sādhanā. 2021 Sep;46(3):1-9.

In 2022

  • Srinivasa P Pai, Vikas Marakini, Uday K Bhat, Dinesh Thakur Singh, Bhaskar P Achar, High speed machining for enhancing the AZ91 Magnesium alloy surface integrity,Defence Science Journal, Vol. 72, No. 1, January 2022, pp. 105-113, DOI : 10.14429/dsj.72.17049, January 2022

  • Naik M, Thakur DG, Chandel S. An insight into the effect of printing orientation on tensile strength of multi-infill pattern 3D printed specimen: Experimental study. Materials Today: Proceedings. 2022 Feb 24.

  • Naik M, Thakur D, Chandel S, Salunkhe S. Experimental investigations on thermal, flame retardant, and impact properties of additively manufactured continuous FRPC. Polymer Composites.

  • Abhaysingh M. Daphale Chetan S. Patil, Mohd. Imran Ansari, Dineshsingh G. Thakur Numerical investigation of the effect of fibre volume fraction on the stress distribution of aerospace grade Al-Li 8090 metal matrix composite, Int. J. Materials and Structural Integrity, Vol. x, No. x, xxxx, In Press, 2022.

  • Ras Selvan, Murali And Thakur Modelling And Optimisation Of Eni-P-Tio2 Coatings Synthesised With Zwitterionic Surfactant On Naval Grade Ah36 Steel
    SADHNA (Accepted).

  • Vikas Marakini, P.Srinivasa Pai, K.Udaya Bhat, Dinesh SinghThakur, Bhaskara P.Achar,  Enhancing the surface integrity characteristics of Al-Li alloy using face milling, Volume 324, 1 October 2022, 132610, Materials Letters June 2022

  • R Anthoni Sagaya Selvan, Dinesh G Thakur, M Seeman, R Muraliraja & Mohd. Imran Ansari, Modelling and optimisation of ENi-P-TiO2 coatings synthesised with Zwitterionic surfactant on naval grade AH36 Steel, Sådhanå (2022) 47:116, Indian Academy of Sciences
    https://doi.org/10.1007/s12046-022-01890-7 , June 2022

Ph.D Thesis Supervision:

  • Transmission And Reflection Of Lamb Waves In Delaminated Composite     Structure. 2012

  • Cfd Analysis Of Effect Of Surface Roughness On The Performance Of Turbo Machinery 2012

  • Design Of Multistage Axial Flow Compressor Using Optimization Method 2013

  • Fem Impact Analysis Of Projectile On Composite Material Ceramic (Al2o3)-Steel (4340) Composite Armour 2014

  • Parametric Optimization And Evaluation Of Electroless Nickel Coating From Tribological Aspects For Marine Application-A Taguchi Approach 2014

  • Selective Investigation Of The Surface Characteristics/Properties Of Duplex Coating (Plasma Nttriding+Pvd Tin Coating) Applied To Defence Material. 2014

  • Fabrication And Characterization Of Graphite Reinforcement In Aluminium Alloy Based Mmc For Marine Application (Journal Bearing) 2015

  • Optimization Of Process Parameters For Electroless Nickel Coating Using Rsm 2015

  • An Investigation Of High-Temperature Corrosion And Degradation Of Boiler Combustion Component (Swirler) For Marine Application 2015

  • Optimization Of Armour Of Improvised Light Bullet Proof Vehicle By Finite Element Simulation 2015

  • To Investigate The Effect Of Tool Geometries On The Distribution Of Heat Profile During Friction Stir Welding Of Aluminum Alloy (Al 2024-T6) Using Abaqus 2016

  • Numerical & Experimental Analysis Of Acceleration Shock Pulse On Heavy Mass Test Object For Defence Applications 2016

  • Effect Of Ph On Electroless Nickel-Phosphorus-Al2o3 / Zno Composite Deposits On Mild Steel Substrate

  • For Marine Applications 2016

  • Experimental Investigation Of The Effect Of Infill Parameters On Flexural Properties Of 3d Printed Bio-Inspired Structural Members 2017

  • Micromechanical Modelling Of Fiber And Particle Reinforced Metal Matrix Composite 2017

  • Optimization Of Space Craft And Satellite Antenna Reflector Made Of Sandwiched Aluminium Honeycomb And Composite 2017

  • Fabrication And Characterisation Of Ceramic Reinforced Aluminium Alloy Based Metal Matrix Composite 2017

  • Parametric Optimization For Asp-30 Tool Steel On Wire Electrical Discharge Machining Using Taguchi Technique 2017

  • Design Optimisation Of Avionics Rack 2018

  • Structural Analysis Of Vehicle Hull Subjected To Blast Loading 2018

  • Electrctroless Coating For Marine Applications 2018

  • Micro-Mechanical Modelling Of B4c And Sic Particulate Reinforced In 8090 Al-Li Alloy Metal Matrix Composite 2018

  • Analytical And Experimental Studies On Cryogenic Plate Fin Heat Exchanger For Helium Liquefier 2018

  • Structural Analysis Shell 125mm High Explosive Ammunition 2018

  • Investigation Of Rake Angle And Depth Of Cut Effects On Orthogonal Micromachining Process Using Fem Simulation Approach 2019

  • Design And Analysis Of Marine Propeller 2019

  • Finite Element Analysis Of Special Purpose Trailer With Steerable Axles 2019

  • Experimental Investigation Of Mechanical Properties And Wear Behaviour Of Additive Manufactured Inconel 718 For Aerospace Applications 2019

  • Analysis Of Ship Propulsion Shaft Line Alignment In Dry Dock And At Various Loading Conditions Of The Vessel 2019

  • Estimation Of Fatigue Life Of Breech Mechanism Of An Artillery Gun 2020

  • Process Parameter Optimization Of Directional Solidification Of Turbine Blades By Numerical Analysis 2020

  • Modelling, Trajectory Simulation And Range Evaluation Of Medium Calibre Ammunition 2020

  • Analytical And Numerical Study To Enhance Armour Penetration By Apfsds Ammunition 2020

  • Analysis Of Corrosion Resistance Of Transom Flange With Electroplated Zn-Al Coating On Mild Steel (Ah-36) 2020

  • Structural Analysis And Topology Optimization Of Sabot Of 125 Mm Pmt Fsapds Ammunition For Attaining Higher Depth Of Penetration (Dop) 2020

  • Musculoskeletal Modelling And Simulation Of Biped Locomotion For Assistive Devices 2020

  • Design An Actuator For Autonomous Assistive Augmented Device 2020

  • Topology Optimization Of Aircraft Wing Fuselage Lug Bracket Attachment 2020

  • A Study On Corrosion Resistance Of Electroless Ni-P Coating For Marine Applications 2020

  • Numerical And Experimental Analysis Of Solid Particle Erosion On Pipe Bends Onboard Naval Ships 2020

Social Media

  • Facebook
  • Twitter
  • LinkedIn
  • Instagram
  • YouTube

Total Visitors Count

Search on Website

© 2022-23 Department of Mechanical Engineering (DoME)

Defence Institute of Advanced Technology (D.U.), Pune, Maharashtra.

An Autonomous organization under the Department of Defence Research & Development, Ministry of Defence, Government of India.

bottom of page