top of page

About

Precision Engineering & Manufacturing Laboratory

About Laboratory

Multipurpose CNC Micromachining Centre.jpg

Multipurpose CNC Micromachining Centre

Specifications

Make: Sinergy Nano System  Model: Hyper 15w

  • Process: CNC Micromachining

  • Make: Sinergy nano systems

  • Model: Hyper – 15W

  • Work Table (LxWxH): 250-300mm x 100-150mm x 50-100mm

  • Travel: 135mm x 65mm x 65mm

  • Repeatability: ±5um

  • Spindle: 300-3000rpm

  • Motor resolution: 0.1um

3D_PIV.png

Surface Roughness Tester

Surface Roughness Tester.jpg

Specifications

Make: Taylor Hobson Model:  Surtronic 25

  • Gauge range: 300µm

  • Resolution: 0.01µm

  • Pickup time: Inductive

  • ,Stylus Tip: Diamond, radius 5µm

  • Traverse length: 0.25-25mm(0.01-0.98in

  • Cut of Value:0.25,0.8,2.5mm(0.01,0.03,0.1 in),

  • Filter type: 2 CR or Gaussian

  • Accuracy (Ra, Rz): 2% of reading +LSD mm

  • Overall Dimensions:137 x 78 x 60mm

Profile Projector.jpg

Profile Projector

Specifications

Make: SCIPCON   Model: SP-300

  • Screen: Opaque glass screen with 90° cross line Fitted with graduated rotary ring (0-360°) operated by knob, L.C. 1min

  • Screen Size: 300mm

  • Light Axis: Vertical

  • Optics: 10x, 20X, 50X, 100X

  • Workstage Size: 160mm X 160mm / 260mm X 260mm

  • Resolution: 1µm/0.5µm/0.1µm

  • Measuring System: Micrometres / PC based Software

  • Projection Accuracy: ±0.05% (Contour / Surface)

  • Illumination: 24V/150W halogen lamp, illumination control with condenser unit provide light as per lens

  • Optional Hardware: Profile Charts, Rotary Table, V-block, Centre Holding Device Opto Edge Sensor, Rotary Encoder

Micro Hardness Tester

Specifications

Make: Wilson  Model:1202

  • Hardness Scales HV & HK

  • XY testing Table: Size 100 X 100 mm, Travelling dist:25 X 25 mm,

  • Travelling Precision: 0.01mm, Max height:125 mm .

  • Light  source : LED

  • Eye piece: 10X digital eyepiece.

  • Objectives: 5X,10X, 50X Objectives for available selection.

  • M/C Dimensions: 520 X 230 X 520 mm.

  • Power Consumption: 25 W.

Micro Hardness Tester.jpg
Measuring Microscope.jpg

Measuring Microscope

Specifications

Make: Olympus  Model: STM7

  • Illumination system: White for reflected illumination, Green for Transmitted illumination.

  • Power Consumption: 10W.

  • Stroke: 200(X)x200(Y)mm

  • No of Axis: 3 Axis.

  • Min resolution: 0.1µm.

  • Measuring objective: 3X, 5X, 10X, 20X.

  • Eyepiece resolution: 10X.

  • Middle motorized frame.

  • Maximum Measurable height: 175 mm*3, 120 mm*4

Pin On Disc Wear and Friction Test Rig

Specifications

Make: Magnum  Model: ASTM G99

  • Pin diameter – 3mm – 12 mm.

  • Pin Length – 25mm to 40mm.

  • Normal load range – up to 150N.

  • Frictional force range – up to 150N (with a resolution of 1N with tare facility)

  • Wear measuring range - ±2000 microns (least count 10 microns through LVDT)

  • Sliding speed – up to 150m/min.

  • Disc speed – 100 to 1500 rpm

  • Wear disc diameter – 165 mm.

  • Wear disc track diameter – 10 to 140mm.

  • Pin Heating system – up to 250ºC.

  • Specimen Holders – Ball, Square, Rectangular.

Pin On Disc Wear and Friction Test Rig.jpg
Coating Thickness Gauge.jpg

Coating Thickness Gauge

Specifications

Make: INSPEX   Model: IPX-205FN

  • Display: 4 digits LCD, backlit

  • Range: 0-1250µm/0-50mm

  • Resolution: 0.1µm(0-99.9µm), 1µm (over 100µm).

  • Accuracy: ±1-3% or 2.5µm or 0.1 mm (whichever is greater)

  • PC interface: with RS-232C interface.

  • Power supply: 2×1.5 AAA.

  • Operating condition: Temp.0-55ºc, HumidityË‚95%.

  • Size: 126×65×35 mm / 5.0×2.6×1.6 inch

  • Weight: approx. 81g

bottom of page